Single Effects Pedals from Guitarbitz

Ana Echo Analogue Delay Effects Pedal

Thu, 13 Jun 2013 16:14:27 +0100

Delay Time: 20ms-300msInput: 1/4” monaural jack (impedance: 470k Ohms)Output: 1/4” monaural jack (impedance: 470 Ohms)Power Requirements: AC adapter 9V DC (center minus plug)Current Draw: 26 mADimensions: 93.5mm (D) × 42mm (W) × 52mm (H)Weight: 160g

BCB-60: Pedal Board for Effects Pedals

Wed, 19 Jun 2013 14:05:14 +0100

BCB-60: Pedal Board for Effects Pedals

Connectors: INPUT Jack, SEND Jack, RETURN A Jack, RETURN B Jack, OUTPUT A Jack, OUTPUT B Jack, PSC IN Jack, DC OUT JackPower Supply: DC 9V; ACadaptor (PSC-series)Accessories:AC adaptor (PSC-series)Pre-cut insert x 3Spare insert x 18-pin parallel DC cordL-L cable (short) x 5L-L cable (long) x 3Owner's ManualWidth:670 mm, 26-7/16 inchesDepth: 370 mm, 14-5/8 inchesHeight: 100 mm, 3-15/16 inchesWeight: 3.8 kg, 8 lbs. 7 oz.

BD-2: Blues Driver Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

BD-2: Blues Driver Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmsNominal Output Level: -20 dBuOutput Impedance: 1 k ohmsEquivalent Input Noise Level: -118 dBu (IHF-A, Typ.)Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 9 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

BF-3: Flanger Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

BF-3: Flanger Effects Pedal

Nominal Input Level: -20 dBu Input Impedance: 1 M ohms Nominal Output Level: -20 dBu Output Impedance: 1 k ohms Recommended Load Impedance: 10 k ohms or greater Delay Time: 0.3 mS to 14.4 ms (GUITAR IN), 0.3 ms to 6.3 ms (BASS IN) LFO Speed: 100 mS to 18 S Residual Noise: -95 dBu (IHF-A Typ.) Controls: Pedal Switch, MANUAL Knob, RES (resonance) Knob, DEPTH Knob, RATE Knob, MODE Knob Indicator: CHECK Indicator (Serves also as tempo and battery check indicator) Connectors: GUITAR IN Jack, BASS IN Jack, OUTPUT A (MONO) Jack, OUTPUT B Jack, AC adaptor Jack (DC 9 V) Power Supply: DC 9 V: Dry battery (9 V type), AC Adaptor (PSA-series: optional) Current Draw: 40 mA (DC 9 V) Accessory: Dry battery (9 V type) S-006P/9 V (6F22/9 V), Owner's Manual Option: AC Adaptor: PSA-Series

CEB-3: Bass Chorus Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

CEB-3: Bass Chorus Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmsNominal Output Level: -20 dBuOutput Impedance: 1 k ohmsRecommended Load Impedance: 10 k ohms or greaterResidual Noise Level: -86 dBu (IHF-A, Typ.)Connectors: INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 22 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Options: AC Adaptor (PSA-Series)

Classic Wah Wah Pedal

Wed, 19 Jun 2013 14:05:14 +0100

Classic Wah Wah Pedal

* Input/Output jacks: INST jack, AMP jack, DC i/p jack. * Power supply: One 9V DC battery 6F22(S006P) * Power consumption: 540uA @ 9VDC * Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions) * Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position) * Weight: 942g (including battery)

Competition Series Chorus Effects Pedal

Thu, 13 Jun 2013 16:25:09 +0100

Competition Series Chorus Effects Pedal

Input Impedance: 500 kOhm Output Load Impedance: >10 kOhm Equivalent Input Noise: -90dBm Power Consumption: 20mA Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L Weight: 1.2 lbs Powered by either a 9-volt battery or an AC adapter

Competition Series Delay Effects Pedal

Thu, 13 Jun 2013 16:26:23 +0100

Competition Series Delay Effects Pedal

Input Impedance: 500 kOhm Output Load Impedance: >10 kOhm Equivalent Input Noise: -110dBm Power Consumption: 11mA Digital Circuit 300ms Delay Time Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L Weight: 1.2 lb. Powered by either a 9-volt battery or an AC adapter

Competition Series Distortion Effects Pedal

Thu, 13 Jun 2013 16:27:45 +0100

Competition Series Distortion Effects Pedal

Input Impedance: 500 kOhm Output Load Impedance: >10 kOhm Equivalent Input Noise: -110dBm Power Consumption: 11mA Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L Weight: 1.2 lb. Powered by either a 9-volt battery or an AC adapter

Competition Series Drive Effects Pedal

Thu, 13 Jun 2013 16:24:00 +0100

Competition Series Drive Effects Pedal

Input Impedance: 500 kOhm Output Load Impedance: 10 kOhm Equivalent Input Noise: -110dBm Power Consumption: 11mA Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L Weight: 1.2 lb. Powered by either a 9-volt battery or an AC adapter

Cruncher Distortion Effects Pedal

Thu, 13 Jun 2013 16:16:52 +0100

Cruncher Distortion Effects Pedal

Input: 1/4” monaural jack (impedance: 1M Ohms)Output: 1/4” monaural jack (impedance: 1k Ohms)Power Requirements: AC adapter 9V DC (center minus plug)Current Draw: 7 mADimensions: 93.5mm (D) × 42mm (W) × 52mm (H)Weight: 160g

CS-3 Compression Sustainer Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

CS-3 Compression Sustainer Effects Pedal

Input Impedance: 1 M ohmsOutput Impedance: 1 k ohmsEquivalent Input Noise Level: -110 dBu (IHF-A Weighted, Typ.)Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor JackPower Supply: DC 9 V: Dry Battery 9 V type, AC AdaptorCurrent Draw: 11 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

DA-2: Adaptive Distortion Effects Pedal

Mon, 13 May 2013 10:55:23 +0100

DA-2: Adaptive Distortion Effects Pedal

Nominal Input Level: 20 dBu Input Impedance: 1 M ohms Nominal Output Level: 20 dBu Output Impedance: 1 k ohms Controls: Pedal switch LEVEL knob LOW knob HIGH knob A-DIST (Adaptive Distortion) knob Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (9 V DC) Power Supply: 9 V DC: Dry Battery 9 V type, AC Adaptor Current Draw: 45 mA (9 V DC) Accessories: Dry Battery 9 V type (6F22/9 V) Options: AC Adaptor (PSA-Series)

DD-3: Digital Delay Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

DD-3: Digital Delay Effects Pedal

Boss DD-3: Digital Delay Input Impedance: 1 M ohms Output Impedance: 10 k ohms or greater Residual Noise Level: –95 dBu (IHF-A, Typ.) Connectors: INPUT Jack, DIRECT OUTPUT Jack, MAIN OUTPUT Jack AC Adaptor Jack (DC 9 V) Power Supply: DC 9 V: Dry Battery 9 V type, AC Adaptor Current Draw: 45 to 65 mA (DC 9 V) Accessories: Dry Battery 9 V type (6F22/9 V) Options: AC Adaptor (PSA-Series)

DD-7: Digital Delay Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

DD-7: Digital Delay Effects Pedal

Controls: E.LEVEL, F.BACK, D.TIME, MODE,Pedal switch Indicator: CHECK (Used for indication of TEMPO, HOLD, and to check battery) Connectors: INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, TEMPO/EXP jack, AC adaptor jack (DC 9 V) Delay Time: 1 ms to 6400 ms* Maximum recording time: 40 sec (in Hold mode)*Values may vary according to the mode and connections. Nominal Input Level: -20 dBu Input Impedance: 1 M ohm Nominal Output Level: -20 dBu Output Impedance: 1 k ohm Recommended Load Impedance: 10 ohms or greater Power Supply: DC 9 V: Dry battery, 9 V type (6F22/carbon, 6LR61/alkaline)AC Adaptor (PSA-series: optional)DC 9 V: Dry battery 6F22 (9 V) type (carbon)/Dry battery 6LR61 (9 V) type (alkaline),AC Adaptor (PSA-series: optional) Current Draw: 55 mA (DC 9 V) * Expected battery life under continuous use: Carbon: 1.5 hours, Alkaline: 6 hours. These figures will vary depending on the actual conditions of use. Accessories: Owner's Manual, Mode Sticker, Application Sticker, Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V type, 6LR61) *1 Options: AC adaptor (PSA-series), Footswitch: FS-5U, Expression pedal: Roland EV-5

DS-2: Turbo Distortion Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

DS-2: Turbo Distortion Effects Pedal

Input Impedance: 1 M ohmsOutput Impedance: 10 k ohms or greaterEquivalent Input Noise Level: –120 dBu or less (IHF-A, Typ.)Connectors: INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor JackPower Supply: DC 9 V: Dry Battery 9 V type, AC AdaptorCurrent Draw: 12 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

Ensemble King Analogue Chorus Effects Pedal

Thu, 13 Jun 2013 16:21:06 +0100

Ensemble King Analogue Chorus Effects Pedal

Input: 1/4” monaural jack (impedance: 470k Ohms)Output: 1/4” monaural jack (impedance: 470 Ohms)Power Requirements: AC adapter 9V DC (center minus plug)Current Draw: 9 mADimensions: 93.5mm (D) × 42mm (W) × 52mm (H)Weight: 160g

FB-2: Feedbacker/Booster Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

FB-2: Feedbacker/Booster Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmNominal Output Level: -20 dBuOutput Impedance: 1 k ohmRecommended Load Impedance: 10 k ohms or greaterPower Supply: DC 9 V: Carbon-zinc battery (9 V, 6F22)/Alkaline battery (9 V, 6LR61), AC Adaptor (PSA series: sold separately)Current Draw: 45 mA (DC 9 V)* Expected battery life under continuous use:Carbon: 2.5 hoursAlkaline: 9 hoursThese figures will vary depending on the actual conditions of use.Accessories: Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (9 V, 6LR61)Option (sold separately): AC adaptor (PSA series)

FZ-5: Fuzz Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

FZ-5: Fuzz Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmNominal Output Level: -20 dBuOutput Impedance: 1 k ohmRecommended Load Impedance: 10 k ohms or greaterControls: Pedal switch, LEVEL knob, FUZZ knob, MODE knobIndicator: CHECK indicator (Serves also as battery check indicator)Connectors: INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)Power Supply: DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)Current Draw: 36 mA (DC 9 V)Expected battery life under continuous use: Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.Accessories: Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)Options: AC Adaptor (PSA series)

G3 Multi Guitar Effects Pedal and Amp Simulator

Sat, 15 Jun 2013 02:05:14 +0100

G3 Multi Guitar Effects Pedal and Amp Simulator

Effect Types 107 Simultaneous Effects 3 Patch Memory 10 patches x 10 banks Sampling Frequency 44.1kHz A/D Conversion 24bit, 128times over-sampling D/A Conversion 24bit, 128times over-sampling Signal Processsing 32bit floating point and 32bit fixed point Frequency Response 20Hz - 20kHz + 1.0dB, -3.0dB (10kΩ load) Display LCD × 3 Input 1/4'' phone jack Rated input level: -20dBm Input impedance: 1MΩ ACTIVE/PASSIVE (Switch selectable) Output R 1/4'' phone jack Maximum output level: +5dBm (Output load impedance: 10kΩ or higher) L/Mono/Phone 1/4'' stereo phone jack (LINE / PHONES) Maximum output level: [LINE] +5dBm (Output load impedance: 10kΩ or higher), [PHONES] 20mW + 20mW into 32Ω load Balanced Output XLR jack Output impedance: 100Ω(HOT-GND, COLD-GND), 200Ω(HOT-COLD) PRE / POST (Switch selectable) GND LIFT (Switch selectable) Control Input For FP02 / FS01 USB Audio Interface: 16bit / 44.1kHz Supported OS: Windows XP/Vista/7, Mac OS X v10.4/10.5/10.6 S/N 120dB Noise Floor −100dBm Power AC adapter DC9V/Center negative/500mA (ZOOM AD-16) Batteries AA/LR6 battery x 4 Battery Life: 6 hours (with alkaline batteries) USB Bus power Dimensions 170 (D) x 234 (W) x 54 (H) mm Weight 1.2kg (without batteries)

GE-7: Graphic Equaliser Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

GE-7: Graphic Equaliser Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmsNominal Output Level: -20 dBuOutput Impedance: 1 k ohmsResidual Noise Level: 1 k ohmsResidual Noise Level: -100 dBu (IHF-A Weighted, Typ.)Variable Range: Equalizer Control: +/- 15 dB, Level Control: +/- 15 dBConnectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 10 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

Green Mile Overdrive Effects Pedal

Thu, 13 Jun 2013 16:22:57 +0100

Green Mile Overdrive Effects Pedal

Effects Modes: 2 (Warm, Hot)Input: 1/4” monaural jack (impedance: 500k Ohms)Output: 1/4” monaural jack (impedance: 10k Ohms)Power Requirements: AC adapter 9V DC (center minus plug)Current Draw: 7 mADimensions: 93.5mm (D) × 42mm (W) × 52mm (H)Weight: 150g

HT-BOOST Gain Booster Guitar Effects Pedal

Sun, 16 Jun 2013 00:04:51 +0100

HT-BOOST Gain Booster Guitar Effects Pedal

Genuine valve design Operates at 300V HT Cascaded valve gain stages Hotrod your valve amp Silent switching operation All-valve tone control circuit Pedals or 'hot' valve amplifier outputs High integrity buffered bypass Power supply included

HT-DELAY Guitar Effect Pedal

Tue, 11 Jun 2013 10:27:01 +0100

HT-DELAY Guitar Effect Pedal

8 delay effects Genuine valve design Operates at 300V HT Unique saturation control Tap and two loops modes Stereo Unique switching operation Silent switching Power supply included High integrity buffered bypass

HT-DIST Distortion Guitar Effects Pedal

Tue, 11 Jun 2013 10:27:51 +0100

HT-DIST Distortion Guitar Effects Pedal

Genuine valve design Operates at 300V HT Cascaded valve gain stages Responds like a valve amp Unique enhanced tone controls Patented Infinite Shape Feature (ISF) Fully equipped for stage or studio Speaker emulated output High integrity buffered bypass Power supply included Silent switching

HT-DISTX High Gain Guitar Effects Pedal

Tue, 11 Jun 2013 10:28:07 +0100

HT-DISTX High Gain Guitar Effects Pedal

HT-DRIVE Overdrive Guitar Effect Pedal

Tue, 11 Jun 2013 10:28:11 +0100

HT-DRIVE Overdrive Guitar Effect Pedal

Genuine valve design Operates at 300V HT Cascaded valve gain stages Responds like a valve amp Unique 'AClass' tone control Fully equipped for stage or studio Speaker emulated output High integrity buffered bypass Power supply included Silent switching

HT-DUAL Distortion Guitar Effects Pedal

Sun, 16 Jun 2013 00:11:29 +0100

HT-DUAL Distortion Guitar Effects Pedal

Genuine valve design Operates at 300V HT Cascaded valve gain stages Responds like a valve amp 2 channel operation Clean, Crunch & Lead modes Unique switching operation Unique enhanced tone controls Patented Infinite Shape Feature (ISF) Fully equipped for stage or studio Speaker emulated output High integrity buffered bypass Power supply included Silent switching

HT-METAL Distortion Guitar Effects Pedal

Tue, 11 Jun 2013 10:27:44 +0100

HT-METAL Distortion Guitar Effects Pedal

Genuine valve design Operates at 300V HT Cascaded valve gain stages Extreme Gain and Tone Responds like a valve amp 2 channel operation Clean, Overdrive and Super High Gain Lead modes Unique switching operation Unique enhanced tone controls Patented Infinite Shape Feature (ISF) Fully equipped for stage or studio Speaker emulated output High integrity buffered bypass Power supply included Silent switching

HT-MODULATION Guitar Effects Pedal

Tue, 11 Jun 2013 10:27:08 +0100

HT-MODULATION Guitar Effects Pedal

8 modulation effects Genuine valve design Operates at 300v HT Unique Saturation control Manual and Slow/Fast modes Stereo Unique switching operation Silent switching Power supply included High integrity buffered bypass

HT-REVERB Guitar Effects Pedal

Sun, 16 Jun 2013 00:08:00 +0100

HT-REVERB Guitar Effects Pedal

8 reverb effects Genuine valve design Operates at 300v HT Unique dwell control Manual and Short/Long modes Stereo Unique switching operation Silent switching Power supply included High integrity buffered bypass

Mini Stomp Power Supply

Wed, 19 Jun 2013 14:05:14 +0100

Mini Stomp Power Supply

Line 6 Mini Stomp Power Supply 9 Volt power supply Will not power stompbox modelers, POD/XT/X3, or Variax Products

MS-50G Multi Stomp

Mon, 10 Jun 2013 14:05:09 +0100

MS-50G Multi Stomp

Effect Types 55 Simultaneous Effects 6 Patch Memory 50 Sampling Frequency 44.1kHz A/D Conversion 24bit, 128times over-sampling D/A Conversion 24bit, 128times over-sampling Signal Processsing 32bit floating point and 32bit fixed point Frequency Response 20Hz?20kHz +1dB -3dB (10kΩload) Display LCD Input 1/4'' phone jack Rated input level: -20dBm Input impedance: 1MΩ Output 2 x 1/4'' phone jack Maximum output level: +5dBm Output load impedance 10kΩ or higher Power AC Adapter DC9V / Center negative / 500mA (AC adapter: ZOOM AD-16) Batteries AA/LR6 battery x 2 Battery Life: 7 hours (with alkaline batteries) USB Bus Power Dimensions 130.3 (D) x 77.5 (W) x 58.5 (H) mm USB Firmware Update Weight (without batteries) 350g

OC-3: Super Octave Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

OC-3: Super Octave Effects Pedal

Nominal Input Level: -20 dBu Input Impedance: 1 M ohms Nominal Output Level: -20 dBu Output Impedance: 1 k ohms Recommended Load Impedance: 10 k ohms or greater Residual Noise: -96 dBu (IHF-A, Typ.) * All knobs at center position ControlsPedal switch, DIRECT LEVEL knob, OCT1 LEVEL knob, CONTROL knob, MODE knob Connectors: GUITAR IN jack, BASS IN jack, OUTPUT (MONO) jack, DIRECT OUT jack, AC adaptor jack (DC 9 V) Power Supply: DC 9 V: Dry battery (9 V type), AC Adaptor (PSA-series: optional) Current Draw: 50 mA (DC 9 V) Accessories: Owner's Manual, Dry battery (9 V type) S-006P/9 V (6F22/9 V) Options: AC Adaptor (PSA-Series)

OD-3: OverDrive Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

OD-3: OverDrive Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmsNominal Output Level: -20 dBuOutput Impedance: 1 k ohmsEquivalent Input Noise Level: -115 dBu (IHF-A Weighted, Typ.)Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 9 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

ODB-3: Bass OverDrive Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

ODB-3: Bass OverDrive Effects Pedal

Nominal Input Level: -20 dBuInput Impedance: 1 M ohmsNominal Output Level: -20 dBuOutput Impedance: 1 k ohmsEquivalent Input: Noise Level -110 dBu (IHF-A, Typ.)Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 15 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Options: AC Adaptor (PSA-Series)

Original Wah Wah Pedal

Wed, 19 Jun 2013 14:05:14 +0100

Original Wah Wah Pedal

* Input/Output jacks: INST jack, AMP jack * Power supply: One 9V DC battery 6F22(S006P) * Power consumption: 540uA @ 9VDC * Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions) * Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest postion) * Weight: 1673g (including battery) * Included Accessories: Vinyl carry bag

OS-2 OverDrive/Distortion Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

OS-2 OverDrive/Distortion Effects Pedal

Input Impedance: 1 M ohms Output Impedance: 10 k ohms or greater Equivalent Input Noise Level: -100 dBu or less (IHF-A, Typ.) Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V) Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor Current: Draw 12 mA (DC 9 V) Accessories: Dry Battery 9 V type (6F22/9 V) Option: AC Adaptor (PSA-Series)

PCS-20A: Parallel DC Cord

Wed, 19 Jun 2013 14:05:14 +0100

PCS-20A: Parallel DC Cord

Roland DC Cord Daisy Chain Allows multiple pedals to be powered

PH-3: Phase Shifter Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

PH-3: Phase Shifter Effects Pedal

Nominal Input Level: -20 dBu Input Impedance: 1 M ohms Nominal Output Level: -20 dBu Output Impedance: 1 k ohms Recommended Load Impedance: 10 k ohms or greater Residual Noise Level: -92 dBu (IHF-A, Typ.) Connectors: INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor Current Draw: 50 mA (DC 9 V) Accessories: Dry Battery 9 V type (6F22/9 V) Options: AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)

POD PX2 Power Supply Adaptor

Mon, 10 Jun 2013 14:05:09 +0100

POD PX2 Power Supply Adaptor

Line 6 POD Power Supply 9v AC power supply

RC 3 Loop Station Looper Pedal

Wed, 19 Jun 2013 14:05:14 +0100

RC 3 Loop Station Looper Pedal

Nominal Input Level: - INPUT: -20 dBu - AUX IN: -10 dBu Input Impedance: - INPUT: 1 M ohm - AUX IN: 22 k ohms Nominal Output Level: -20dBu Output Impedance: 1 K Ohm Recommended Load Impedance: 10 k ohms or greater Recording/Playback: - Maximum Recording Time: Approximately 3 hours - Maximum Phrase Memory: 99 phrases - Number of tracks: 1 - Data Format: WAV (44.1 kHz, 16-bit linear, stereo) Rhythm Type: Hi-Hat, Kick & Hi-Hat, Rock 1, Rock 2, Pop, Funk, Shuffle, R & B, Latin, Percussion USB Interface: Hi-Speed USB mass storage device class Controls: - Pedal switch - LOOP OUTPUT knob - RHYTHM OUTPUT knob - DOWN button - UP button - WRITE button - RHYTHM ON/OFF button - TAP TEMPO button Indicators: REC, PLAY (DUB) indicator Display: 7 segments, 2 characters (LED) Connectors: - INPUT A Jack: 1/4" phone type - INPUT B Jack: 1/4" phone type - AUX IN Jack: Stereo miniature phone type - OUTPUT A Jack: 1/4" phone type - OUTPUT B Jack: 1/4" phone type - STOP/MEMORY SHIFT Jack: 1/4" TRS phone type - USB Connector - DC IN Jack (DC 9 V) Power Supply: - DC 9 V: Alkaline battery (9 V, 6LR61) - AC Adaptor (PSA series: sold separately) Current Draw: 70 mA (DC 9 V) Expected battery life under continuous use: Alkaline battery (9 V, 6LR61): Approx. 3 hours (figure varies depending on conditions of use.) Included Accessories: - Owner's Manual - Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information") - Alkaline battery (9 V, 6LR61): already installed in unit Dimensions: - Depth: 129mm (5-1/8") - Height: 59m (2-3/8")

RC-30: Loop Station Looper Pedal

Mon, 10 Jun 2013 14:05:09 +0100

RC-30: Loop Station Looper Pedal

Nominal Input Level -MIC IN: -40 dBu (variable) INST IN: -20 dBu AUX IN: -10 dBu Input Impedance - MIC IN: 4 k ohms INST IN: 1 M ohm AUX IN: 22 k ohms Nominal Output Level - -20 dBu Output Impedance - 1 k ohm Recommended Load Impedance - 10 k ohms or greater Recording/Playback- Maximum Recording Time: Approximately 3 hours Maximum Phrase Memory: 99 phrases Number of tracks: 2 Data Format: WAV (44.1 kHz, 16-bit linear, stereo) Rhythm Type - Hi-Hat, Kick & Hi-Hat, Rock 1, Rock 2, Pop, Funk, Shuffle, R&B, Latin, Percussion Effect Type - BEND DOWN, STEP PHASER, SWEEP FILTER, TEMPO DELAY, Lo-Fi USB Interface - Hi-Speed USB mass storage device class Controls - REC/PLAY/OVERDUB pedal switch, STOP/TAP TEMPO pedal switch, MIC INPUT LEVEL knob, MEMORY DOWN button, MEMORY UP button, MEMORY WRITE button, MEMORY DELETE button, RHYTHM OUTPUT LEVEL knob, RHYTHM ON/OFF button, RHYTHM TYPE button, RHYTHM TAP TEMPO button, TRACK 1 slider, TRACK 1 SELECT button, TRACK 2 slider, TRACK 2 SELECT button, LOOP FX ON/OFF, LOOP FX TYPE button, PHANTOM switch Indicators - POWER indicator, REC/PLAY (DUB) indicators, PEAK indicator, TRACK 1 STATUS indicator, TRACK 2 STATUS indicator, BEND DOWN indicator, STEP PHASER indicator, SWEEP FILTER indicator, TEMPO DELAY indicator, Lo-Fi indicator Display - 7 segments, 2 characters (LED) Connectors - MIC IN Jack: XLR type (balanced/phantom power: DC 48 V, 10 mA), INST IN Jacks (L/MONO, R): 1/4" phone type, AUX IN Jack: Stereo miniature phone type, OUTPUT Jacks (L/MONO, R): 1/4" phone type, FOOT SW Jack: 1/4" TRS phone type, USB Connector, DC IN Jack (DC 9 V) Power Supply - DC 9 V: Alkaline (AA, LR6) or Carbon-zinc battery (AA, R6) x 6, AC Adaptor (PSA series: sold separately) * Rechargeable Ni-MH batteries cannot be used. Current Draw - Maximum 195 mA (DC 9 V) Expected battery life under continuous use - Alkaline battery (AA, LR6): Approx. 7.5 hours Carbon-zinc battery (AA, R6): Approx. 1.5 hours These figures will vary depending on the actual conditions of use. Included Accessories - Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (AA, LR6) x 6 Options (sold separately) - AC Adaptor (PSA series), Footswitch (FS-5U, FS-6)

RV-5: Digital Reverb Effects Pedal

Mon, 13 May 2013 10:55:24 +0100

RV-5: Digital Reverb Effects Pedal

Boss Digital Reverb RV-5 Pedal Stereo Capabilities Spring, Plate, Hall, Modulate, Gate and Room Modes Nominal Input Level: -20 dBu Input Impedance: 1 M ohms Nominal Output Level: -20 dBu Output Impedance: 1 k ohms Recommended Load Impedance: 10 k ohms or greater Residual Noise: -93 dBu (IHF-A, Typ.): All knobs at center position Controls: Pedal Switch, E.LEVEL knob, TONE knob, TIME knob, MODE switch Connectors: INPUT-A (MONO) jack, INPUT-B jack, OUTPUT-A (MONO) jack, OUTPUT-B jack, AC adaptor jack (DC 9 V) Power Supply: DC 9 V: Dry battery (9 V type), AC Adaptor Current Draw: 50 mA (DC 9 V) Accessories: Dry battery (9 V type) S-006P/9 V (6F22/9 V), Owner's Manual Options: AC Adaptor PSA-Series

Satchurator Distortion Pedal Effects Pedal

Wed, 19 Jun 2013 14:05:14 +0100

Satchurator Distortion Pedal Effects Pedal

* Analog distortion pedal designed under the complete supervision of Joe Satriani * Controls for Gain, Tone and Volume * ?More? gain boost switch enables two footswitchable distortion sounds in one pedal. This gain boost is dramatic when gain knob is set low, and is a subtle solo boost when gain knob is set to maximum. * ?Pad? switch pads down input to allow for high gain pedals (such as modern wahs) placed before Satchurator. Up is pad ?ON?. Down is pad ?OFF? for full Satchurator effect. * High gain, low noise design provides vintage to modern distortion sounds * Dynamic circuit is highly responsive to rolling off the guitar?s volume and preserves the guitar?s high end when the volume is rolled off. * Cream chickenhead knobs for precise positioning and high visibility on dark stages

SD-1: Super OverDrive Effects Pedal

Mon, 10 Jun 2013 14:05:09 +0100

SD-1: Super OverDrive Effects Pedal

Input Impedance: 470 k ohmsOutput Impedance: 10 k ohms or greaterConnectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC AdaptorCurrent Draw: 6 mA (DC 9 V)Accessories: Dry Battery 9 V type (6F22/9 V)Option: AC Adaptor (PSA-Series)

TR-2: Tremolo Effects Pedal

Wed, 19 Jun 2013 14:05:14 +0100

TR-2: Tremolo Effects Pedal

Boss TR-2 Tremolo Nominal Input Level: -20 dBu Input Impedance: 1 M ohms Nominal Output Level: -20 dBu Output Impedance: 1 k ohms Residual Noise Level: -90 dBu (IHF-A Weighted, Typ.) Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V) Power Supply: DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor Current Draw: 20 mA (DC 9 V) Accessories: Dry Battery 9 V type (6F22/9 V) Option: AC Adaptor (PSA-Series)

TU-3: Chromatic Tuner Pedal

Wed, 19 Jun 2013 14:05:14 +0100

TU-3: Chromatic Tuner Pedal

Tuning Range: C0 (16.35Hz)–C8 (4186Hz)Reference Pitch: A4=436–445 Hz (1Hz step)Tuning Accuracy: ±1 centPower Supply: DC 9 V: Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)Current Draw: 30 mA (DC 9 V), 85 mA (DC 9 V, when High Brightness mode is on)Accessories: Owner’s Manual, Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”), Dry battery/9 V type (6F22)Options: AC adaptor: PSA series, Parallel DC cord: PCS-20A